Post Offer Free
WUXI XITONG TECHNOLOGY GROUP  

Gold Index: 6501

You are here: home  > 1700 Square Meter Filtering Area Hot Mix Asphalt Plant With 220KW Induced Draft Fan

1700 Square Meter Filtering Area Hot Mix Asphalt Plant With 220KW Induced Draft Fan 

Place of Origin: Zhejiang, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: QLB-HX

bag filter and volute casing collector hot mix asphalt plant with 220KW induced draft fan
 
Inspec

bag filter and volute casing collector hot mix asphalt plant with 220KW induced draft fan

 

Inspection before start-up of batching type hot mixing asphalt plant

 

A. Remove all wrappers, wrapping threads and belts, slipcover etc.

. Ensure that all guards are installed correctly.

. Check all transmission chains and belts of driving equipments, and ensure that all of them are tensioned and adjusted properly.

. Check and remove all limiting parts for transportation, and these parts are used to protect the facility against damage.

. Check all pneumatic linkers to decide if they are installed properly with air-cylinders and anti-arch components.

. Check all recommended lubrication grease to decide if they reach correct level, and please consult to the schedule mentioned above.

. All grease cups should be infused fully with the recommended grease.

. Check all tensile sensor to decide if they are installed and linked properly.

. Check asphalt-supplying system, and ensure all pipes are connected tightly without leak.

. All check-up and cleanliness doors should be installed firmly.

. The oil level of air compressor should reach the recommended position with special oil referring to the manual that offered by manufacturer.

. Check all bolts and assemblies for looseness after operating a period, and screw down again.

. Check the installation of burner for accordance with maintenance manual.

. Ensure all metering hoppers and sensors not touching and hanging to other parts.

. Ensure that all electric wires are installed firmly and reliably, for instance, not knotted, not chafed for insulating layer, and not installed in the positions easily knocked and broken by the moving parts.

. The inspection of baghouse refers to aftermentioned maintenance instruction.

Notice

Be sure to keep the operation temperature of baghouse above dewdrop, so as to avoid congealed phenomenon in the bags.

Maintenance of lubrication for batch type asphalt hot mixing plant 

 

Lubrication schedule

 

Item Position Cycle Variety Remark
1 Slope belt conveyor Drive and driven Track runner bearing 3 days 2# calcium base grease 12- shot
Transmission chain 3 days 20# machineoil Protecting inunctions
2 Collective conveyor Drive and driven Track runner bearing 3 days 2# calcium base grease 12- shot
Transmission chain 3 days 20# machineoil Protecting inunctions
3 Drum dryer Friction wheel bearing 3 days 1# lithium grease 23- shot
Retaining wheel bearing 7 days 1# lithium grease 12- shot
4 Hot aggregate hoister Bearings 3 days 1# lithium grease 12- shot
5 Mineral powder hoister Bearings 3 days 2# calcium base grease 12- shot
Transmission chain 3 days 20# machineoil Protecting inunctions
6 Vibration screen Principal axis bearings Everyday 1# lithium grease 23- shot
7 Hot agg.bin Gate shaft bearings Every month 2# calcium base grease 1- shot
8 Mixing tank Principal axis bearings 3 days 1# lithium grease 23- shot
Gate shaft bearings Every month 2# calcium base grease 1- shot
Large gear Every month 2# calcium base grease  
9 Induced draft fan Principal axis bearings 3 days 1# lithium grease 23- shot
10 Screw conveyor End bearings 3 days 2# calcium base grease 1- shot
11 Asteroids feeder End bearings 3 days 2# calcium base grease 1- shot
12 Weighing silo Gate shaft bearings Every month 2# calcium base grease 1- shot
13 Asphalt ready product BIn Trolley Trolley surfaces 7 days 2# calcium base grease Protecting inunctions
Bearing 3 days 2# calcium base grease 1-shot
Door roller 7 days 2# calcium base grease 1-shot
14

Wind

lass

bigPhoto
 Mr. Mr. Jia Wang

Tel: 86-510-85361108
Contact to this supplier

Related Search

Find more related products in following catalogs on Hisupplier.com

Company Info

WUXI XITONG TECHNOLOGY GROUP [China (Mainland)]


Business Type:Manufacturer
City: Wuxi
Province/State: Jiangsu
Country/Region: China (Mainland)

You May Like:

Product (126)